20% Fat Emulsion Injection 100ml

20% Fat Emulsion Injection
  • Dosage: 20%
  • Volume:  100 ml per  bottle
  • Packaging: Sterile bag for injection, 100 ml bag 
  • Shelf Life: 36 months 

Click to add this item to cart.

Product Description

Product Name20% Fat Emulsion Injection (Intralipid-type Parenternal Fat Emulsion)
Specification100mL per container; 20% w/v fat emulsion (20g soybean oil per 100mL; approximately 2 kcal/mL, total 200 kcal per 100mL)
Dosage FormSterile, Nonpyrogenic, White Milky Emulsion for Intravenous Infusion
Active IngredientsSoybean Oil (long-chain triglycerides, LCT); Egg Yolk Phospholipids (emulsifier); Glycerol (isotonic agent)
Pharmacological ClassParenternal Nutrition Agent / Intravenous Fat Emulsion (Energy Substrate and Essential Fatty Acid Source)
Route of AdministrationIntravenous infusion only (via central or peripheral venous access). NOT for intramuscular, subcutaneous, or direct intravenous bolus injection. Do NOT infuse through a filter smaller than 1.2 micron.
Packaging100mL sterile plastic infusion bag (PVC or non-PVC) or glass bottle
StorageStore below 25°C, protected from light. Do NOT freeze. Freezing may cause emulsion destabilization and oil separation; discard any frozen product. Keep container in overwrap until use (for plastic bags).
Shelf Life36 months (unopened)

Product Overview

20% Fat Emulsion Injection 100mL is a sterile, nonpyrogenic, white milky emulsion intended for intravenous infusion. Each 100mL container contains 20g of refined soybean oil (long-chain triglycerides), 1.2g of egg yolk phospholipids (as emulsifying agent), and 2.25g of glycerol (as isotonic agent), in Water for Injections. The product provides a concentrated source of calories (approximately 2 kcal/mL, totaling approximately 200 kcal per 100mL) and essential fatty acids (linoleic acid and alpha-linolenic acid) for patients requiring parenteral nutrition support when oral or enteral nutrition is not feasible, insufficient, or contraindicated.

20% Fat Emulsion Injection 100ml: What the Published Guidance Says

Crystalloid infusion solutions, energy substrates and parenteral nutrition components — the fluid-resuscitation and supportive-care layer underneath almost every inpatient protocol.

Buyers usually settle three things before ordering 20% Fat Emulsion Injection 100ml: the pharmacopoeial monograph, the pack configuration, and the documents the destination authority will ask for.

  • Presentation is part of the specification WHO's criterion for an essential medicine includes that it be available in appropriate dosage forms for the intended uses and patients. For infusion solutions that criterion is expressed as fill volume and container format — the difference between a 500 mL bottle and a 1 L bag is a formulary decision before it becomes a price decision. WHO — Essential medicines (fact sheet)
  • Human albumin is a blood-derived product with its own regulatory pathway Human albumin 20% is supplied as a plasma volume substitute in hypovolaemia and hypoalbuminaemia. Because it is derived from human plasma, most markets apply separate requirements covering plasma sourcing, donor screening and viral inactivation. Confirm the documentation format your regulator expects before ordering.
  • The Model List specifies the crystalloid formulations The 24th WHO Model List (2025) carries sodium chloride 0.9% isotonic (equivalent to Na⁺ 154 mmol/L and Cl⁻ 154 mmol/L) and glucose + sodium chloride combinations of 4% + 0.18%, 5% + 0.9% and 5% + 0.45%, classified under solutions correcting water, electrolyte and acid-base disturbances. Glucose + sodium chloride was first added in 1979. WHO eEML — Glucose + sodium chloride

Each point above is reproduced because it has a practical consequence for 20% Fat Emulsion Injection 100ml: the strength you can register, the pack you can release, or the wording permitted on the label. Your national prescribing information always takes precedence.

Supply & Specification Data for 20% Fat Emulsion Injection 100ml

Product Name20% Fat Emulsion Injection (Intralipid-type Parenternal Fat Emulsion)
Specification100mL per container; 20% w/v fat emulsion (20g soybean oil per 100mL; approximately 2 kcal/mL, total 200 kcal per 100mL)
Dosage FormSterile, Nonpyrogenic, White Milky Emulsion for Intravenous Infusion
Active IngredientsSoybean Oil (long-chain triglycerides, LCT); Egg Yolk Phospholipids (emulsifier); Glycerol (isotonic agent)
Pharmacological ClassParenternal Nutrition Agent / Intravenous Fat Emulsion (Energy Substrate and Essential Fatty Acid Source)
Route of AdministrationIntravenous infusion only (via central or peripheral venous access). NOT for intramuscular, subcutaneous, or direct intravenous bolus injection. Do NOT infuse through a filter smaller than 1.2 micron.
StorageStore below 25°C, protected from light. Do NOT freeze. Freezing may cause emulsion destabilization and oil separation; discard any frozen product. Keep container in overwrap until use (for plastic bags).
Therapeutic groupIV Fluids — IV Fluids
ManufacturerSinophare Bio-technology Co., Ltd. (GMP, China)
Documentation suppliedCOA, HPLC/GC data, stability data, dossier package

The same therapeutic range is supplied in several presentations, so one purchase order can cover a mixed requirement: Human Albumin 20% 50ml, Lactated Ringer’s Injection 500mL, 10% Dextrose Injection 500ml, 5% Dextrose Injection 500ml, Fructose Injection 5g/250mL.

Testing, Monographs & Batch Documentation

Products are manufactured and tested against USP, EP, BP and CP monographs, with incoming raw-material inspection, in-process monitoring and full finished-product testing.

Release testing for 20% Fat Emulsion Injection 100ml follows the monograph you nominate — USP, EP, BP or CP. If the presentation is not covered by a monograph, the specification is frozen in writing with your quality team before the batch is manufactured.

Standardised GMP production workshops with an independent R&D laboratory and a complete quality-inspection centre.

The batch record for this product normally includes:

  • Testing for assay of the active substance
  • Testing for related substances and impurities
  • Testing for dissolution or release profile (solid oral forms)
  • Testing for uniformity of dosage units
  • Testing for water content and pH where applicable
  • Testing for sterility and bacterial endotoxins (parenterals and ophthalmics)

COA, HPLC and GC data, DMF and dossier packages, plus registration support documents for national marketing-authorisation filings.

Pack Configuration, Artwork & Shipping Documents

  • Pack size: 100mL sterile plastic infusion bag (PVC or non-PVC) or glass bottle. Non-standard pack sizes can be quoted against your artwork.
  • Storage: Store below 25°C, protected from light. Do NOT freeze. Freezing may cause emulsion destabilization and oil separation; discard any frozen product. Keep container in overwrap until use (for plastic bags)..
  • Shelf life: 36 months (unopened). Stability data for the marketed pack is included in the dossier.
  • Labelling: we typeset the carton and leaflet in English, Arabic, French, Russian and Spanish and in any further language your market requires, carrying your own brand where the local rules allow.
  • Export: commercial invoice, packing list, certificate of origin, GMP certificate, COA and the free-sale certificate issued by the country of manufacture whenever your customs or regulator asks for it.

Dossier, Authority Filings & Tender Documentation

The legal manufacturer named on every document for 20% Fat Emulsion Injection 100ml is Sinophare Bio-technology Co., Ltd., DML Number Jin20160068 (medicines) and Jin20160069 (paracetamol API).. The same entity appears on the GMP certificate and on the dossier submitted to your regulator.

  • Site Master File and GMP certificate for the manufacturing workshops.
  • Method validation, stability protocol and the shelf-life justification for the marketed pack.
  • Answers to authority questions during assessment, handled by the regulatory contact who prepared the file.
  • Tender and framework documentation, including pre-qualification questionnaires and sample logistics.
  • Artwork and mock-up approval pack, showing the carton, label and leaflet exactly as they will be printed for your market.

20% Fat Emulsion Injection 100ml is presented here against infusion solutions and parenteral nutrition named in the WHO Model List. Inclusion in an essential-medicines list does not authorise sale in any particular country — the marketing authorisation for that market is a separate step.

Buyer Questions about 20% Fat Emulsion Injection 100ml

What pack size is available for 20% Fat Emulsion Injection 100ml?

Standard commercial packaging for this line is 100mL sterile plastic infusion bag (PVC or non-PVC) or glass bottle. Alternative pack sizes are produced to your specification and are supported by the corresponding stability data.

What documentation comes with a shipment of 20% Fat Emulsion Injection 100ml?

The documentation set for every shipment includes the certificate of analysis (description, identification, assay, related substances), stability data for the marketed pack, and the site GMP certificate. Shelf life: 36 months.

Does the batch documentation for 20% Fat Emulsion Injection 100ml support a registration filing?

The documentation set for every shipment includes the certificate of analysis (description, identification, assay, related substances), stability data for the marketed pack, and the site GMP certificate. Shelf life: 36 months. The full CTD dossier and the authority assessment file are supplied as part of a registration order; routine shipments carry the COA and stability data only.

Do you supply lactated Ringer's solution?

Yes — lactated Ringer's injection in 500 mL and other fill volumes. Balanced crystalloids have an electrolyte profile closer to plasma than 0.9% saline.

Can you supply human albumin?

We supply human albumin 20% 50 mL with batch documentation. Confirm your market's requirements for plasma sourcing and viral-inactivation records first.

Other IV Fluids Products in This Range

Browse the full IV Fluids range; all Injectables; the complete product catalogue.

Request a Quotation for 20% Fat Emulsion Injection 100ml

Tell us the monograph, pack size and quantity required for 20% Fat Emulsion Injection 100ml 100mL, together with the destination market, and the quotation will state lead time and the documents that ship with the batch. Samples for registration can be added to the same order.

Request a quotation

Sources & Regulatory Notes

Reference information only. The published guidance summarised on this page is quoted for professional and regulatory-context purposes and does not constitute medical advice, a prescribing recommendation or a promotion of any product for a particular indication. Prescribing decisions must follow the approved product information and national treatment guidelines in the market of use.

<< return to products