0.1% Sodium Hyaluronate Eye Drops | Lubricating Artificial Tears for Dry Eyes

Sodium Hyaluronate Eye Drops
  • Concentration: 0.1% Sodium Hyaluronate (1 mg/ml)
  • Volume: 5ml or 10ml per bottle
  • Packaging: Sterile plastic dropper bottle, 1 bottle/box
  • Shelf Life: 24 months (unopened)

Click to add this item to cart.

Product Description

Product Name0.1% Sodium Hyaluronate Eye Drops 5ml (Sodium Hyaluronate Ophthalmic Solution)
SpecificationEye drops containing 0.1% (1 mg/mL) Sodium Hyaluronate in a sterile ophthalmic solution; typically supplied in multi-dose dropper bottle (e.g., 10mL) or single-use vials
Dosage FormSterile Ophthalmic Solution (Eye Drops — for topical ocular administration)
Active IngredientSodium Hyaluronate (Sodium Hyaluronate / Hyaluronic Acid Sodium Salt — Viscoelastic Polysaccharide Lubricant)
Pharmacological ClassOphthalmic Lubricant / Demulcent (Viscoelastic Polysaccharide — Dry Eye Relief)
Route of AdministrationTopical ocular (instilled into the conjunctival sac). Typically 1-2 drops in the affected eye(s) as needed, up to several times daily.
PackagingSterile multi-dose dropper bottle (e.g., 10mL) with tamper-evident seal; or single-use preservative-free vials (e.g., 0.5mL or 10 vials per box)
StorageStore at room temperature (15°C-25°C), protected from light. Keep container tightly closed. Do not freeze. Discard multi-dose bottle within the period specified after first opening (e.g., 4 weeks).
Shelf LifePer product labeling (typically 24 months unopened; discard within 4 weeks of first opening for multi-dose bottles)

Product Overview

0.1% Sodium Hyaluronate Eye Drops is a sterile ophthalmic solution containing 0.1% (1 mg/mL) sodium hyaluronate. It is a lubricating eye drop used to relieve the symptoms of dry eye, providing long-lasting lubrication and moisture to the ocular surface.

0.1% Sodium Hyaluronate Eye Drops: What the Published Guidance Says

Fifteen ophthalmic products spanning anti-infective, anti-allergic, anti-inflammatory, antiviral and ocular-surface categories — including the two anti-infectives the WHO Model List names for conjunctivitis and infectious keratitis.

0.1% Sodium Hyaluronate Eye Drops sits in the Ophthalmic range. The notes below are the ones that most often change a specification, a label or a tender submission.

  • Trachoma and endophthalmitis have separate recommendations For trachoma the treatment of choice is a single oral dose of azithromycin, with topical azithromycin or tetracycline also indicated. For bacterial endophthalmitis, the listings for ceftazidime, ceftriaxone and vancomycin were extended to cover it as a first-choice option, with the Committee noting that intravitreal administration requires specialist training and adequate infrastructure. WHO eEML — Ofloxacin (ophthalmological)
  • Gentamicin eye drops 0.3% are on the Model List for ocular infection WHO lists gentamicin eye drops 0.3% (gentamicin sulfate) for infectious blepharitis, classified in the Access group of the AWaRe framework. The Expert Committee has specified amikacin, kanamycin, netilmicin and tobramycin as therapeutic alternatives under the gentamicin square-box listing. WHO eEML — Gentamicin (ophthalmological)
  • Evidence for conjunctivitis does not favour one antibiotic over another The Committee noted that topical antibiotics are indicated for moderate to severe infection and can be considered in mild cases, but that available evidence does not make it possible to identify specific, preferred antibiotics for conjunctivitis. It therefore endorsed the existing gentamicin and tetracycline listings rather than picking a winner. WHO eEML — Ofloxacin (ophthalmological)

Each point above is reproduced because it has a practical consequence for 0.1% Sodium Hyaluronate Eye Drops: the strength you can register, the pack you can release, or the wording permitted on the label. Your national prescribing information always takes precedence.

Supply & Specification Data for 0.1% Sodium Hyaluronate Eye Drops

Product Name0.1% Sodium Hyaluronate Eye Drops 5ml (Sodium Hyaluronate Ophthalmic Solution)
SpecificationEye drops containing 0.1% (1 mg/mL) Sodium Hyaluronate in a sterile ophthalmic solution; typically supplied in multi-dose dropper bottle (e.g., 10mL) or single-use vials
Dosage FormSterile Ophthalmic Solution (Eye Drops — for topical ocular administration)
Active IngredientSodium Hyaluronate (Sodium Hyaluronate / Hyaluronic Acid Sodium Salt — Viscoelastic Polysaccharide Lubricant)
Pharmacological ClassOphthalmic Lubricant / Demulcent (Viscoelastic Polysaccharide — Dry Eye Relief)
Route of AdministrationTopical ocular (instilled into the conjunctival sac). Typically 1-2 drops in the affected eye(s) as needed, up to several times daily.
StorageStore at room temperature (15°C-25°C), protected from light. Keep container tightly closed. Do not freeze. Discard multi-dose bottle within the period specified after first opening (e.g., 4 weeks).
Therapeutic groupOphthalmic — Ophthalmic
ManufacturerSinophare Bio-technology Co., Ltd. (GMP, China)
Documentation suppliedCOA, HPLC/GC data, stability data, dossier package

The same therapeutic range is supplied in several presentations, so one purchase order can cover a mixed requirement: 0.1% Dexamethasone Sodium Phosphate Eye Drops 10mL, 5% Taurine Eye Drops 10mL, 1% Acyclovir Eye Drops 10mL, 0.5% Chloramphenicol Eye Drops 10mL, 0.3% Gentamicin Eye Drops 10mL, 0.5% Hypromellose Eye Drops 10mL, 0.5% Kanamycin Eye Drops 10mL, 2.5% Lincomycin Hydrochloride Eye Drops 10mL.

Testing, Monographs & Batch Documentation

Products are manufactured and tested against USP, EP, BP and CP monographs, with incoming raw-material inspection, in-process monitoring and full finished-product testing.

Release testing for 0.1% Sodium Hyaluronate Eye Drops follows the monograph you nominate — USP, EP, BP or CP. If the presentation is not covered by a monograph, the specification is frozen in writing with your quality team before the batch is manufactured.

Standardised GMP production workshops with an independent R&D laboratory and a complete quality-inspection centre.

The batch record for this product normally includes:

  • Testing for dissolution or release profile (solid oral forms)
  • Testing for uniformity of dosage units
  • Testing for water content and pH where applicable
  • Testing for sterility and bacterial endotoxins (parenterals and ophthalmics)
  • Testing for microbial limits and preservative efficacy (multi-dose presentations)
  • Testing for heavy metals and elemental impurities

COA, HPLC and GC data, DMF and dossier packages, plus registration support documents for national marketing-authorisation filings.

Pack Configuration, Artwork & Shipping Documents

  • Pack size: Sterile multi-dose dropper bottle (e.g., 10mL) with tamper-evident seal; or single-use preservative-free vials (e.g., 0.5mL or 10 vials per box). Non-standard pack sizes can be quoted against your artwork.
  • Storage: Store at room temperature (15°C-25°C), protected from light. Keep container tightly closed. Do not freeze. Discard multi-dose bottle within the period specified after first opening (e.g., 4 weeks)..
  • Shelf life: Per product labeling (typically 24 months unopened; discard within 4 weeks of first opening for multi-dose bottles). Stability data for the marketed pack is included in the dossier.
  • Labelling: we typeset the carton and leaflet in English, Arabic, French, Russian and Spanish and in any further language your market requires, carrying your own brand where the local rules allow.
  • Export: commercial invoice, packing list, certificate of origin, GMP certificate, COA and the free-sale certificate issued by the country of manufacture whenever your customs or regulator asks for it.

Dossier, Authority Filings & Tender Documentation

The legal manufacturer named on every document for 0.1% Sodium Hyaluronate Eye Drops is Sinophare Bio-technology Co., Ltd., DML Number Jin20160068 (medicines) and Jin20160069 (paracetamol API).. The same entity appears on the GMP certificate and on the dossier submitted to your regulator.

  • Artwork and mock-up approval pack, showing the carton, label and leaflet exactly as they will be printed for your market.
  • Batch manufacturing and packaging records released for inspection on request during supplier audits.
  • Re-test or renewal support when the marketing authorisation comes up for variation or renewal.
  • CTD dossier modules 1–5 in editable and PDF form, with the finished-product and API sections cross-referenced.
  • Site Master File and GMP certificate for the manufacturing workshops.

0.1% Sodium Hyaluronate Eye Drops is presented here against ophthalmic preparations used in WHO and MSF eye-care protocols. Inclusion in an essential-medicines list does not authorise sale in any particular country — the marketing authorisation for that market is a separate step.

Buyer Questions about 0.1% Sodium Hyaluronate Eye Drops

What pack size is available for 0.1% Sodium Hyaluronate Eye Drops?

Standard commercial packaging for this line is Sterile multi-dose dropper bottle (e.g., 10mL) with tamper-evident seal; or single-use preservative-free vials (e.g., 0.5mL or 10 vials per box). Alternative pack sizes are produced to your specification and are supported by the corresponding stability data.

What documentation comes with a shipment of 0.1% Sodium Hyaluronate Eye Drops?

The documentation set for every shipment includes the certificate of analysis (description, identification, assay, related substances), stability data for the marketed pack, and the site GMP certificate. Shelf life: Per product labeling.

Does the batch documentation for 0.1% Sodium Hyaluronate Eye Drops support a registration filing?

The documentation set for every shipment includes the certificate of analysis (description, identification, assay, related substances), stability data for the marketed pack, and the site GMP certificate. Shelf life: Per product labeling. The full CTD dossier and the authority assessment file are supplied as part of a registration order; routine shipments carry the COA and stability data only.

Do you supply preservative-free eye drops?

We can supply both preserved and preservative-free presentations depending on the product and your market requirement. Specify the preservative system on your enquiry.

Can you supply trypan blue for cataract surgery?

Yes. Trypan blue ophthalmic solution is available for capsule staining, supplied with sterility documentation.

Other Ophthalmic Products in This Range

Browse the full Ophthalmic range; all Ophthalmic; the complete product catalogue.

Request a Quotation for 0.1% Sodium Hyaluronate Eye Drops

Tell us the monograph, pack size and quantity required for 0.1% Sodium Hyaluronate Eye Drops 1mg/mL, together with the destination market, and the quotation will state lead time and the documents that ship with the batch. Samples for registration can be added to the same order.

Request a quotation

Sources & Regulatory Notes

Reference information only. The published guidance summarised on this page is quoted for professional and regulatory-context purposes and does not constitute medical advice, a prescribing recommendation or a promotion of any product for a particular indication. Prescribing decisions must follow the approved product information and national treatment guidelines in the market of use.

<< return to products