Sodium Hyaluronate Eye Drops

SODIUM HYALURONATE

Product Description

Each mL contains:

Sodium Hyaluronate 5mg (0.1%).

Package:

5mL bottle in box .

What are Sodium Hyaluronate eye drops used for?

Sodium Hyaluronate eye drops are lubricating eye drops for dry eyes. They can be used to protect your eye from irritations such as contact lenses, dry air and to provide relief after an injury to the eye such as a corneal abrasion. A corneal abrasion is a scratch or graze to the clear front surface of the eye called the cornea.

How are Sodium Hyaluronate eye drops given?

Dose: Two drops should be applied to your affected eye four times a day. You can use further drops to provide relief from dryness or irritation if necessary.
The eye drops should be applied to your affected eye following the instructions below.

To apply the eye drops:

1. Wash your hands.
2. Remove the cap from the bottle.
3. Tilt your head back and look up.
4. Hold the bottle upside down above your eye.
5. Gently pull down the lower lid to form a sac and look up at the bottle.
6. Carefully squeeze the sides of the bottle to drop two drops into the sac of your lower lid then blink to spread the eye drop across the surface of the eye.
7. Screw the cap back on the bottle after use.

EXPERT ADVICE FOR SODIUM HYALURONATE
  • Your doctor has prescribed Sodium Hyaluronate to treat dry eye disease.
  • It stabilizes the natural tear film and maintains necessary lubrication so your eyes don’t get dry and irritated.
  • May require long-term use.
  • Apply pressure on the corner of the eye (close to the nose) for about 1 minute immediately after instilling the drop.
  • Wait for at least 5-10 minutes before delivering the next medication in the same eye to avoid dilution.
  • Stinging sensation may occur for 1-2 mins. Notify your doctor if it persists for longer.